Waterproofing Specification For
Basement
Terrace Waterproofing
Waterproofing of Roof Gardens/
Landscape Area
Water Tank or Water Retaining
Structure
Overdeck Insulation Cum
Waterproofing
Swimming Pool
 
 
 
Terrace Waterproofing
PRODUCT TYPE & NAME : BUILDWRAP P 3mm – APP based polymeric membrane with non woven polyester mat as reinforcement.
 
Removal of loose particles from all over the place & ensure that the surface has smooth slope & fillets are provided on the joints of terrace & parapet wall.
 
Application of a coat of cold applied bituminous primer BUILDPRIME @ 0.3 lit/sqm.
 
Providing & laying of APP based polymeric membrane ( BUILDWRAP P 3mm) with non woven polyester mat as reinforcement on primed surface by torch on application with an overlap of 75mm at the sides and 100mm at the ends and sealing all overlaps and joints. The membrane will be taken over the fillets for the vertical surface and the same shall be finished by taking uptil the end and thereafter continuing it in the flat surface of the parapet and finishing the same. For high parapets the membrane shall be taken to a height of min 60cms and then shall be inserted inside the parapet after a chase cutting is made. The same shall be finished by a membrane flashing.
 
 
TOP FINISH & PROTECTION (FOR TRAFFICKING TERRACE)
Providing and laying a chicken wire mesh of 24swg over the membrane waterproofing treatment.
Laying a 20mm cement mortar screed of 1:4 ratio over the chicken wire mesh in slope towards the gutter.
or
Providing & laying of concrete tiles (fixed or loose)
or
Laying of broken china tiles on a coat of blown bitumen and grouting with cement mortar.
FOR NON TRAFFICKING TERRACE
Providing and laying a coat of aluminium paint on the top of the surface for protection.
 
Our Prestigious Clients
Home About Us Products Case Studies Specifications Clients Contact Us
Copyright (c) 2009All Right Reserved
Site Designed by ktsindia.com